מנוע "מצלצל" HGT 02

[chenrp]

אופן פירוק סנסור

Removal:
1 The knock sensor is screwed Into the rear
face of the cylinder block, behind the
alternator rear mounting bracket.
2 Firmly apply the handbrake, then jack up
the front of the car and support it securely on
axle stands (see Jacking and vehicle support).
3 Trace the wiring back from the sensor to its
wiring connector, and disconnect it from the
main loom.
4 From under the car, disconnect the knock
sensor wiring connector.
5 Undo the sensor securing bolt and remove
the sensor from the cylinder block.